Price : $67.88
You Save : $4.11 (6%)
Product Description
Amazon.com Product Description
Create a operate and storage space that actually fits your needs with Blitz's 2x4basics Workbench Assembly Kit. This innovative, do-it-oneself system lets you effortlessly assemble a custom workbench in less than an hour. All you need to have is some plywood and 2x4s and you are going to have a perform bench that will meet all your project and storage needs.
Use the included bonus ShelfLinks Kitto add shelving to the leading or sides of your workbench. .
2x4basics Workbench Assembly KitAt a Glance
- Assists you create a customized workbench with a height of 36 inches
- Assembles in less than one particular hour
- Each and every shelf holds up to 1,000 pounds (400 kilograms)
- Requires only straight, 90-degree cuts
- Lifetime warranty
Completely Customizable, Quick-to-Assemble Workbench SystemThis do-it-yourself program lets you make a bench that is the exact size you want--up to 8 by four feet--by just adding lumber (not included). Assembly is incredibly straightforward, thanks to the included, hassle-free-to-follow instructions and cut lists. All you need to have is a powered screwdriver and a saw--no other tools are crucial. For added convenience, only straight, 90-degree cuts are needed--no miters or angles--and all the hardware you are going to need is included in the kit. When assembly is completed, the operate surface height will measure approximately 36 inches (90 centimeters).
Advanced Engineering Meets Sturdy, Durable ConstructionSturdy 2x4 framing and advanced engineering make this kit stronger and more stable than most other workbench solutions. In reality, every single shelf will hold up to 1,000 pounds (400 kilograms). An added bonus, the materials are produced of heavy-gauge resins and are influence- and solvent-resistant for extended-term durability.
Versatile Design for Potting Benches, Custom Shelving, and Storage OptionsWith the Workbench Assembly Kit, you are no longer restricted to a typical-sized potting bench--you can make a unit as compact as two feet by 2 feet to use as a plant stand.
In addition, you can use the included bonus 2x4basics ShelfLinks Kit to add shelving to the top rated or sides of your custom workbench (additional ShelfLinks kits sold separately). You can develop custom workbench and storage solutions for your dorm room, garage, basement, shed, or residence. Custom shelving will also add beneficial storage space that fits your project requirements.
What is in the Box Four workbench legs, six ShelfLinks, assembly instructions, hardware, and warranty knowledge.
Customize a operate bench for any jobsite..
Every shelf holds up to 1,000 pounds..
Solvent resistant for extended-term durability..
Expand your shelving and storage with six included ShelfLinks. .
Add your personal lumber to make up to a 8 foot by four foot by 36 inch workbench. No miter cuts are needed. The kit contains 4 workbench legs, 6 shelflinks, and assembly hardware. The sturdy 2 by four framing and advanced engineering tends to make the workbench stronger and extra stable than other workbench kits. Each and every shelf will hold up to 1000 pounds. 6 robust shelf hyperlinks are included in this kit. Shelf links can support spans up to 8 feet and up to 1000 pounds.
See all Product Description
Consumer Testimonials
Last year I bought the 2x4 fundamentals model 14429 Workbench from Amazon. Immediately after obtaining the required wood and placing it together, I liked it so substantially I bought a further workbench. I then posted my detailed critique for the model 14429.
Not too long ago I decided to get but one other 2x4 Basics workbench. The 14429 was no longer accessible from Amazon. Instead, this 'new model' 90164 was provided by Amazon. I bought it.
I have no thought what the difference is. It is the precise exact same workbench as the earlier model.
As I noted in my other review you are acquiring the hardware (the four legs, which are a rather heavy grade plastic, wood screws, hooks and clamps). You need to acquire your own wood (to make my 6 foot by two foot workbench I bought seven 96-inch extended 2 x 4s, plus three 6-foot by 2-foot boards that serve as the bottom, middle and top rated counters). Basically cut your 2 x 4s to the correct length (for a workbench that is six feet long and two feet wide, you will require six 2/4s that are 72 inches extended, six 2 x 4s that are 21 inches extended, and a single 2x4 that is 71 7/8ths inches long). If you go to the page for the older model and go through the photos supplied by reviewers you will get a scan of the size wood you will have to have for a variety of size workbenches you may wish to create.
The directions are rather very simple and consist of photographs (no words). The pictures simply show the sequence for putting the workbench together. You will want your power screwdrive with a Phillips tip. I put the initial two workbenches together by myself, whilst my wife helped with the third one (getting an extra individual is very useful although not important).
The result is a rather, incredibly sturdy workbench. Place your a variety of machines (meter saw, band saw, what have you) on leading with self-confidence. This workbench also comes with 8 plastic factors that you use to develop upper shelves, but I had but to use them. I like my workbenches to be clean on leading. I also do not use the supplied hooks and clamps (for my very first workbench I installed a clamp: it is a joke. You can be in a position to clamp a work-piece that is half-an-inch thick, but no thicker).
This good quality product makes producing your own custom bench a snap. Total build time, by myself, was about 30 minutes with pre-cut lumber. Sure it costs a tiny a great deal more than making your personal legs but I do not have wood working clamps so the price tag distinction was a wash for me. Plus with the shelves built in to hold the 2x4's it was much a lot easier. It is also significantly more affordable than shopping for a bench from a brick and mortar retailer.
I use this bench primarily for a reloading press but I also have a vice mounted and I have not had any problems with either. The most effective element is that if you want to transform the size of your bench at a later date it really is a quick tear down and rebuild. Considering that of which, if you are undecided on bench size, cut your lumber for the bigger size and see if it functions. Modifying for the smaller size is easy if it really is too massive.
Overall I'm very impressed with this item. It comes with some hangers and clamps that I have not utilised but I'm certain would work. Not that fancy but they are not meant to be.
Related Product
No comments:
Post a Comment